Service Checks by Level
Basic
Intermediate
Advanced
Full
Replace cabin filter and clean out housing
Advise if cabin filter is required according to age/mileage recommendations and last change
Check number plate condition
Check mirror condition - interior and exterior
Check windscreen for chips and cracks
Top up screen washer bottles
Check rear wiper condition/operation (if fitted)
Check screen washer operation, align jets if required
Check windscreen wiper condition and operation
Set wheel nut torque to manufacturers settings
Check and adjust tyre pressures (including spare) If no spare, record sealant canister expiry date
Check tyre condition and tread depth (including spare)
Check tyre size and tyre fitted according to side wall instructions
Remove road wheels and check condition of hub faces
Visual inspection of HT (high tension) leads
Check battery security
Check diesel heater plug indicator operation where fitted
Check horn
Check operation of exterior lights
Visual check for exhaust smoke
Inspect exhaust system (inc catalyst if fitted) for leaks, security and noise
Grease steering and suspension (where applicable)
Carry out shock absorber (bounce test) and report any serious leaks
Check steering and suspension components for wear and corrosion
Visually check power steering system, pipes and hoses for leaks, chafing and corrosion
Check wheel bearings for excessive play or noise
Check steering rack gaiters condition
Check steering and suspension components for wear and corrosion
Check/top up power steering reservoir (where applicable)
Replace brake fluid and bleed system
Check brake servo operation
Check brake fluid level and top up if required
Check brake discs and drums for wear, cracks, corrosion and scoring or pitting (excluding internal drums)
Check security of handbrake linkages and travel. Lubricate and adjust if required
Check security of handbrake linkages and travel. Lubricate and adjust if required
Visually check brake hydraulic system, pipes and hoses for any leaks, chafing and corrosion
Check brake callipers for leaks and security
Check brake pads for wear or damage
Check and top up differential oils (if applicable)
Check and top up transfer box (if applicable)
Check and top up gearbox fluid where applicable and not sealed
Grease prop/shaft (if applicable)
Check drive shaft gaiters for security and report leaks
Check for correct gearbox operation
Check and top up clutch fluid (if applicable)
Check for correct clutch operation
Check fuel filter replacement interval and report if due
Check visual condition of fuel lines
Check fuel cap seal condition
Check condition and security of undertray (Where applicable)
Top up coolant as required
Report if spark plugs need changing according to mileage (additional charge for the supply of plugs & fitment)
Replace air filter and clean out housing
Check condition and adjust auxiliary drive belts if required (excluding cambelt)
Check condition and tension of fan and alternator belt. Adjust or report on condition
Check electric cooling fan for operation where applicable
Check coolant hoses for leaks, condition and security
Check coolant/radiator cap seals
Check radiator condition, security and report any leaks
Check for timing belt (cambelt) replacement interval and report if replacement due according to mileage or age
Check for excessive oil leaks
Replace oil filter
Drain engine oil and refill with correct grade, type and quantity
Check steering controls and column for wear/movement
Check operation of brakes for judder/pulling and noise
Check for wheels and trims for damage
Check for body damage
Stamp service book (indicating a RageX Menu Service has been carried out)
Lubricate bonnet catch
Reset vehicle service light where applicable (subject to data and tooling availability)
Lubricate all accessible door hinges
Check operation of all external door locks
Check seat belts
Check dash warning lights